Tag Archives: helical gearbox manufacturers

China high quality Factory Supply Stepper Motor 90mm Helical Planetary Reducer Gearbox planetary gearbox manufacturers

Product Description

Factory Supply Stepper Motor 90mm Helical Planetary Gearbox Reducer

Planetary gearbox is a kind of reducer with wide versatility. The inner gear adopts low carbon alloy steel carburizing quenching and grinding or nitriding process. Planetary gearbox has the characteristics of small structure size, large output torque, high speed ratio, high efficiency, safe and reliable performance, etc. The inner gear of the planetary gearbox can be divided into spur gear and helical gear. Customers can choose the right precision reducer according to the needs of the application.

Product Description

Description:
1.The output shaft is made of large size,large span double bearing design,output shaft and planetary arm bracket as a whole.The input shaft is placed directly on the planet arm bracket to ensure that the reducer has high operating accuracy and maximum torsional rigidity.
2.Shell and the inner ring gear used integrated design,quenching and tempering after the processing of the teeth so that it can achieve high torque,high precision,high wear resistance.Moreover surface nickel-plated anti-rust treatment,so that its corrosion resistance greatly enhanced.
3.The planetary gear transmission employs full needle roller without retainer to increase the contact surface,which greatly upgrades structural rigidity and service life.
4.The gear is made of Japanese imported material.After the metal cutting process,the vacuum carburizing heat treatment to 58-62HRC. And then by the hobbing,Get the best tooth shape,tooth direction,to ensure that the gear of high precision and good impact toughness.
5.Input shaft and sun gear integrated structure,in order to improve the operation accuracy of the reducer.
6.Ring gear processing technology: Using internal gear slotting machine and hobbing machine; the precision of ring gear after processing can reach .GB7.
Planetary reducer characteristic:
1.Quiet operation:helical gears contribute to reduce vibration and noise.
2.High precision:standard backlash is 3 arcmin,ideal for precision control.
3.High rigidity & torque:high rigidity&torque were used integral ball bearings.
4.Adapter-bushing connection:can be attached to any motor all over the world.
5.No grease leakage:perfect dissolution using high viscosity anti-separation grease.
6.Maintenance-free:no need to replace the grease for the life of the unit.can be attached in any position.

Specifications PX42 PX60 PX90 PX120 PX140 PX180
Technal Parameters
Max. Torque Nm 1.5times rated torque
Emergency Stop Torque Nm 2.5times rated torque
Max. Radial Load N 780 1530 3250 6700 9400 14500
Max. Axial Load N 390 630 1300 3000 4700 7250
Torsional Rigidity Nm/arcmin 2.5 6 12 23 47 130
Max.Input Speed rpm 8000 8000 8000 8000 6000 6000
Rated Input Speed rpm 4000 4000 3000 3000 3000 3000
Noise dB ≤56 ≤58 ≤60 ≤65 ≤68 ≤68
Average Life Time h 20000
Efficiency Of Full Load % L1≥95%       L2≥90%
Return Backlash P1 L1 arcmin / ≤3 ≤3 ≤3 ≤3 ≤3
L2 arcmin / ≤5 ≤5 ≤5 ≤5 ≤5
P2 L1 arcmin ≤5 ≤5 ≤5 ≤5 ≤5 ≤5
L2 arcmin ≤7 ≤7 ≤7 ≤7 ≤7 ≤7
Moment Of Inertia Table L1 3 Kg*cm2 / 0.16 0.61 3.25 9.21 28.98
4 Kg*cm2 0.03 0.14 0.48 2.74 7.54 23.67
5 Kg*cm2 0.03 0.13 0.47 2.71 7.42 23.29
7 Kg*cm2 0.03 0.13 0.45 2.62 7.14 22.48
8 Kg*cm2 0.03 0.13 0.45 2.6 / /
10 Kg*cm2 0.03 0.13 0.4 2.57 7.03 22.51
L2 12 Kg*cm2 / 0.13 0.45 0.45 2.63 7.3
15 Kg*cm2 / 0.13 0.45 0.45 2.63 7.3
20 Kg*cm2 0.03 0.13 0.45 0.45 2.63 7.3
25 Kg*cm2 0.03 0.13 0.45 0.4 2.63 7.3
28 Kg*cm2 0.03 0.13 0.45 0.45 2.43 7.1
30 Kg*cm2 / 0.13 0.45 0.45 2.43 6.92
35 Kg*cm2 0.03 0.13 0.4 0.4 2.43 7.1
40 Kg*cm2 0.03 0.13 0.45 0.45 2.43 6.92
50 Kg*cm2 0.03 0.13 0.4 0.4 2.39 6.92
70 Kg*cm2 0.03 0.13 0.4 0.4 2.39 6.72
100 Kg*cm2 0.03 0.13 0.4 0.4 2.39 6.72
Technical Parameter Level Ratio   PX42 PX60 PX90 PX120 PX140 PX180
Rated Torque L1 3 Nm / 40 105 165 360 880
4 Nm 17 45 130 230 480 880
5 Nm 15 45 130 230 480 1100
7 Nm 12 45 100 220 480 1100
8 Nm / 40 90 200 / /
10 Nm 10 30 75 175 360 770
L2 12 Nm / 40 105 165 440 880
15 Nm / 40 105 165 360 880
20 Nm 17 45 130 230 480 880
25 Nm 15 45 130 230 480 880
28 Nm 17 45 130 230 480 1100
30 Nm / 40 105 165 480 1100
35 Nm 10 30 130 230 480 1100
40 Nm 17 45 130 230 480 1100
50 Nm 15 45 130 230 480 1100
70 Nm 12 45 100 220 480 1100
100 Nm 10 30 75 175 360 770
Degree Of Protection   IP65
Operation Temprature ºC  – 10ºC to -90ºC
Weight L1 kg 0.5 1.25 3.75 8.5 16 28.5
L2 kg 0.8 1.75 5.1 12 21.5 40

 

 

Company Profile

Packaging & Shipping

1. Lead time: 7-10 working days as usual, 20 working days in busy season, it will be based on the detailed order quantity;
2. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT

FAQ

1. who are we?
Hefa Group is based in ZheJiang , China, start from 1998,has a 3 subsidiaries in total.The Main Products is planetary gearbox,timing belt pulley, helical gear,spur gear,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3. how to choose the suitable planetary gearbox?
First of all,we need you to be able to provide relevant parameters.If you have a motor drawing,it will let us recommend a suitable gearbox for you faster.If not,we hope you can provide the following motor parameters:output speed,output torque,voltage,current,ip,noise,operating conditions,motor size and power,etc

4. why should you buy from us not from other suppliers?
We are 22 years experiences manufacturer on making the gears, specializing in manufacturing all kinds of spur/bevel/helical gear, grinding gear, gear shaft, timing pulley, rack, planetary gear reducer, timing belt and such transmission gear parts

5. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese,Japanese

Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Manipulator
Function: Change Drive Torque, Change Drive Direction, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step
Samples:
US$ 179/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

planetarygearbox

What is a Planetary Gearbox?

A planetary gearbox is a mechanical device in which the teeth of a planet mesh with the teeth of its sun or ring. The number of teeth and the spacing of planets will determine whether the teeth mesh correctly. In this article, we will learn more about planetary gearboxes. Besides understanding their working, you can also learn how to design your own. Here are some examples:

planetary gearboxes

If your car has an automatic transmission, then a planetary gearbox is the type you have. It is possible to find out if you have this type of gearbox by consulting the owner’s manual, calling the service department of your car’s manufacturer, or conducting a search using your favorite search engine. However, planetary gears are more complex and have many more components than standard gearboxes. The following information will explain more about this type of gearbox.
Planetary gearboxes use three different gear types to transmit torque. The sun gear sits in the center of the gear assembly, while the other gears rotate around it. A carrier connects the two gears, and is designed to set the spacing between them. When the gears are rotated, the carrier will spin, enabling the entire assembly to work together. The carrier also incorporates the output shaft. For this gearbox to work effectively, it must meet the application’s requirements.
There are three main types of planetary gearboxes: the basic model is highly efficient and transmits 97% of the power input. The earliest models are not complex, but they do have some key differences. Some of these differences make them ideal for various applications. For example, a planetary gearbox can operate in alternating and continuous operation, with the output support having internal grooving. Some designs have more than one output shaft, allowing the user to choose the configuration and torque that is best for their application.
One of the main differences between a planetary gearbox and a conventional one is the way the planetary parts move. A planetary gearbox may have multiple axes for increased torque. A planetary gearbox can provide a torque up to 113,000 N.m. by rotating its maximum teeth simultaneously. They are the ideal choice for space-constrained applications. For instance, a car with small spaces can install one with ease.
A planetary gearbox’s gear ratio is determined by the ratio of the sun gear to the ring gear. The number of teeth on the sun gear is a way to adjust the gear ratio. Smaller sun gears result in larger planetary gear ratios, while larger ones cause a decrease in torque. The ratio between planetary gears ranges from 3:1 to 10:1, with the lowest ratio being three. The greatest possible ratio is 10:1.
A planetary gearbox has many benefits. The compact design makes them a more efficient choice for small motors and is advantageous for servo functions. Planetary gearboxes have low inertia, which is an important factor, especially in servo applications, since the inertia of the gearbox adds to the motor’s load inertia. The planetary gearboxes are typically lubricated with grease or oil, so you don’t need to worry about re-lubrication or maintenance.

planetary gearboxes with output shaft

The advantages of planetary gearboxes are numerous. They are widely used in many applications, from automobiles to medical equipment, goods & personnel lifts to machine tools. They are also used in derrick & dockyard cranes and slewing drives. These gearboxes are available in various sizes and shapes, ranging from small to extremely large. There are many different types, and each is designed to suit its intended use.
The LP generation 3 gearhead series combines maximum quality with economic precision in a low-backlash planetary gearbox. The output shaft version is especially suited for high-speed, highly dynamic cyclic operation. Another version is the SP+ HIGH SPEED. The SP+ high-speed version is designed to achieve maximum speeds while in continuous operation. If you need a planetary gearbox with an output shaft, look no further. It is the best choice for many applications.
As the name suggests, a planetary gearbox incorporates planetary parts and an output shaft. The outer gears (also called the planetary gears) are connected by a carrier to the output shaft. The carrier is then connected to the output shaft by a ring. There are two or more planetary gears inside the planetary gearbox. Each gear is connected to a carrier, which is connected to the output shaft.
An epicyclic planetary gear train can be assembled so that the planet gear rolls around the sun gear. In the wheel drive planetary gearbox, the planetary gears are grouped over the housing to optimize the size and weight of the system. The planetary gear train can handle torques as high as 332,000 N.m., with the ring gear being fixed while the sun gear is movable.
Another advantage of a planetary gearbox is that it uses many teeth at once. This allows for high speed reduction and high torque transmission, and it is extremely compact. Planetary gearboxes with output shaft are ideal for space-constrained applications. Their compact size and minimal weight make them a popular choice in many industries. They are also known as epicyclic gears and are used in many different types of machines.
A planetary gearbox can have three components. A central sun gear, an outer ring known as the inner gear, and an output shaft. These three components are linked by a carrier. The carrier rotates so that the input and output gears are in sync. They also have a standard gap between the gears. The carrier also acts as the output shaft. They can be used to create small machines, such as a bicycle acceleration hub.
planetarygearbox

planetary gearboxes with integer number of teeth

When designing a planetary gearbox, one must determine the amount of tooth count. This figure is known as the mesh load factor Kg, and is based on the normal tooth forces that are generated in each mesh. The number of planets, the error in the gear design, and the rigidity of the housing all affect Kg. Depending on the type of application, Kg can be calculated by using different standards.
In a typical planetary gearbox, the ratio is an integer number, and the lowest is 3:1. At a ratio of 10, the sun gear is too large and the sun wheel is too low to provide a sufficient amount of torque. In most cases, the ratio is an integer value, and the teeth are evenly spaced. The gear mesh is then balanced to grade 2. The carrier is measured three-dimensionally to detect the accuracy of the planet pin hole in the carrier.
In the simplest case, each planetary gear mesh produces a dynamic signal at its mesh frequency. These signals can cancel or reinforce in various ways. A helix angle, however, introduces axial forces into the gear mesh, which can be cancelled or reinforced in the same way as torques. As the helix angle is an integer number, this planetary gear model does not necessarily require infinite precision.
The resulting motion period is measured in rotational angles. This figure can be used to determine fault diagnosis and calculate the minimum data length required. It can also be used to calculate the kinematic motion of a faulty planet gear tooth. It is important to note that fault-mesh motion is not instantaneous, and therefore, it requires a sufficient amount of time to fully mesh a faulty planet gear.
The load-share factor is similar to that of spur and helical gearboxes, and can be used to calculate dynamic load sharing. When the load share factor is low, the individual gear meshes are slightly loaded. Deflections can vary, especially with high-precision gears. Therefore, the design process should incorporate the tolerance chain. This will ensure the correct ratio of gear mesh.
A planetary gearbox is a type of planetary gear system that is used in motors. It has a sun gear at the center and a set of outer gears. Each gear turns according to its axis around the sun. They are interconnected by a ring component and are connected to each other through a carrier. The carrier also includes the output shaft. And since the sun gear is centered, the mesh is standard.
As an added benefit, planetary gearboxes have sliding surfaces, which reduce noise and vibration. Despite the high-quality of planetary gearboxes, it is important to properly lubricate them to avoid wear and tear. CZPT uses CZPT. In order to make the planetary gearboxes last a long time, the lubricant is usually incorporated in the planetary gearbox.

China high quality Factory Supply Stepper Motor 90mm Helical Planetary Reducer Gearbox   planetary gearbox manufacturersChina high quality Factory Supply Stepper Motor 90mm Helical Planetary Reducer Gearbox   planetary gearbox manufacturers
editor by CX 2023-11-23

China Best Sales Angle Gearbox 90degree Hollow Shaft High-Quality Efficiency Industries Manufacturers Gear Drives Compact Reducer Low Backlash Helical Spiral Bevel Angle Gearbox near me shop

Product Description

Angle Gearbox 90Degree Hollow Shaft Large-Quality Efficiency Industries Manufacturers Gear Drives Compact Reducer Minimal Backlash Helical Spiral Bevel Angle Gearbox

Substantial-Top quality Correct Angle Gear Drives are created for efficiency, quiet operation, and prolonged services daily life. Ever-Electricity provides a wide assortment of Correct Angle Gear Drives in a variety of configurations, supplies, functioning speeds, and a number of ratios. Standard catalog objects include precision and professional quality equipment drives supplied in the two inch and metric measurements. For modifications or custom designs phone and converse to a At any time-Electricity programs engineer.

Our offering involves, but is not limited to the adhering to:

Miniature sized Right Angle Equipment Drives, 1 inch sq., are best for compact types that need minimal backlash and enter speeds up to 2000 rpm.

When fat is an problem, get Right Angle Bevel Equipment Drives that attribute a lightweight housing of PTMT Polyester 30% glass loaded, precision ground stainless metal shafts, sintered bronze bearings and molded nylon gears.

Proper Angle Worm Gear Drives accommodate input speeds up to 2000 rpm and are available in equipment ratios: 5:1, ten:1 and 20:1.

Appropriate Angle and Twin Helical Gear Drives are offered in 2 models, gentle-responsibility, rated speeds up to 600 rpm and large responsibility, rated speeds up to 1725 rpm.

 

How to Style a Forging Spur Equipment

Just before you start off developing your very own spur equipment, you need to have to comprehend its major parts. Amongst them are Forging, Keyway, Spline, Set screw and other types. Knowing the differences amongst these varieties of spur gears is essential for making an informed decision. To learn much more, hold reading. Also, don’t hesitate to make contact with me for support! Listed below are some valuable tips and methods to design and style a spur equipment. Ideally, they will help you layout the spur equipment of your goals.
Equipment

Forging spur gears

Forging spur gears is one of the most important processes of automotive transmission parts. The production method is intricate and entails many measures, such as blank spheroidizing, very hot forging, annealing, phosphating, and saponification. The materials utilized for spur gears is typically 20CrMnTi. The process is completed by applying a continuous via extrusion forming strategy with dies made for the sizing band size L and Splitting angle thickness T.
The approach of forging spur gears can also use polyacetal (POM), a sturdy plastic generally employed for the manufacture of gears. This material is simple to mould and condition, and following hardening, it is extremely stiff and abrasion resistant. A variety of metals and alloys are employed for spur gears, such as forged metal, stainless metal, and aluminum. Detailed below are the various sorts of components employed in equipment producing and their positive aspects and negatives.
A spur gear’s tooth measurement is measured in modules, or m. Every variety represents the amount of tooth in the gear. As the amount of tooth raises, so does its dimensions. In basic, the higher the variety of teeth, the greater the module is. A high module equipment has a huge pressure angle. It truly is also essential to don’t forget that spur gears must have the same module as the gears they are employed to push.

Set screw spur gears

A contemporary market can not purpose with no established screw spur gears. These gears are very efficient and are commonly employed in a variety of applications. Their style involves the calculation of speed and torque, which are equally vital elements. The MEP model, for instance, considers the modifying rigidity of a tooth pair together its path. The final results are utilised to decide the sort of spur gear essential. Detailed beneath are some suggestions for picking a spur equipment:
Type A. This type of equipment does not have a hub. The equipment itself is flat with a small hole in the middle. Set screw gears are most frequently utilised for light-weight programs with out loads. The steel thickness can range from .25 mm to 3 mm. Set screw gears are also used for huge machines that require to be powerful and sturdy. This post provides an introduction to the different sorts of spur gears and how they differ from one one more.
Pin Hub. Pin hub spur gears use a set screw to protected the pin. These gears are often connected to a shaft by dowel, spring, or roll pins. The pin is drilled to the precise diameter to suit within the gear, so that it does not occur loose. Pin hub spur gears have high tolerances, as the gap is not massive enough to totally grip the shaft. This variety of equipment is typically the most pricey of the three.
Gear

Keyway spur gears

In modern modern business, spur gear transmissions are commonly employed to transfer energy. These sorts of transmissions provide outstanding efficiency but can be inclined to electrical power losses. These losses should be estimated for the duration of the style procedure. A important element of this analysis is the calculation of the speak to location (2b) of the gear pair. Even so, this value is not automatically relevant to every spur equipment. Listed here are some examples of how to compute this region. (See Determine 2)
Spur gears are characterised by getting tooth parallel to the shafts and axis, and a pitch line velocity of up to 25 m/s is considered higher. In addition, they are far more productive than helical gears of the very same measurement. Not like helical gears, spur gears are usually regarded as good gears. They are frequently utilized for apps in which noise management is not an issue. The symmetry of the spur equipment can make them especially appropriate for programs where a constant velocity is required.
Apart from making use of a helical spur equipment for the transmission, the equipment can also have a regular tooth shape. Not like helical gears, spur gears with an involute tooth sort have thick roots, which prevents dress in from the enamel. These gears are simply produced with conventional creation resources. The involute condition is an perfect selection for little-scale creation and is one particular of the most common varieties of spur gears.

Spline spur gears

When thinking about the kinds of spur gears that are utilised, it really is important to observe the variations amongst the two. A spur equipment, also called an involute equipment, generates torque and regulates pace. It’s most typical in vehicle engines, but is also utilised in daily appliances. Nevertheless, one of the most significant drawbacks of spur gears is their sounds. Simply because spur gears mesh only one particular tooth at a time, they develop a substantial volume of pressure and sound, producing them unsuitable for everyday use.
The speak to stress distribution chart signifies the flank location of every equipment tooth and the distance in both the axial and profile direction. A substantial get in touch with spot is found toward the center of the gear, which is induced by the micro-geometry of the equipment. A good l price signifies that there is no misalignment of the spline enamel on the interface with the helix hand. The opposite is true for unfavorable l values.
Utilizing an upper sure technique, Abdul and Dean analyzed the forging of spur equipment forms. They assumed that the tooth profile would be a straight line. They also examined the non-dimensional forging force of a spline. Spline spur gears are typically employed in motors, gearboxes, and drills. The energy of spur gears and splines is largely dependent on their radii and tooth diameter.
SUS303 and SUS304 stainless metal spur gears

Stainless metal spur gears are produced making use of distinct techniques, which count on the substance and the application. The most typical process utilised in manufacturing them is chopping. Other procedures include rolling, casting, and forging. In addition, plastic spur gears are produced by injection molding, based on the quantity of creation needed. SUS303 and SUS304 stainless metal spur gears can be produced using a variety of resources, which includes structural carbon metal S45C, grey forged iron FC200, nonferrous metal C3604, engineering plastic MC901, and stainless metal.
The distinctions in between 304 and 303 stainless steel spur gears lie in their composition. The two kinds of stainless metal share a typical style, but have different chemical compositions. China and Japan use the letters SUS304 and SUS303, which refer to their various levels of composition. As with most varieties of stainless metal, the two diverse grades are manufactured to be utilised in industrial applications, this kind of as planetary gears and spur gears.
Equipment

Stainless metal spur gears

There are a number of factors to search for in a stainless steel spur equipment, such as the diametral pitch, the variety of teeth per device diameter, and the angular velocity of the enamel. All of these aspects are crucial to the overall performance of a spur equipment, and the correct dimensional measurements are important to the design and performance of a spur equipment. Individuals in the market should be familiar with the conditions utilised to describe spur equipment elements, both to make sure clarity in generation and in buy orders.
A spur gear is a type of precision cylindrical equipment with parallel tooth organized in a rim. It is employed in various applications, this sort of as outboard motors, winches, design tools, lawn and yard equipment, turbine drives, pumps, centrifuges, and a assortment of other devices. A spur equipment is normally manufactured from stainless metal and has a substantial stage of longevity. It is the most frequently utilised sort of gear.
Stainless steel spur gears can occur in numerous various designs and measurements. Stainless metal spur gears are typically made of SUS304 or SUS303 stainless steel, which are utilised for their increased machinability. These gears are then heat-treated with nitriding or tooth floor induction. Unlike standard gears, which need to have tooth grinding right after heat-managing, stainless steel spur gears have a reduced use rate and substantial machinability.

China Best Sales Angle Gearbox 90degree Hollow Shaft High-Quality Efficiency Industries Manufacturers Gear Drives Compact Reducer Low Backlash Helical Spiral Bevel Angle Gearbox     near me shop China Best Sales Angle Gearbox 90degree Hollow Shaft High-Quality Efficiency Industries Manufacturers Gear Drives Compact Reducer Low Backlash Helical Spiral Bevel Angle Gearbox     near me shop